← 論文一覧に戻る

燃焼・性能・排出のトレードオフを考慮したエタノール–ガソリン添加剤配合の持続可能な選定のための意思決定支援フレームワーク

A decision‐support framework for sustainable selection of ethanol–gasoline additive formulations considering combustion, performance, and emission trade‐offs (原題)

Vishnu Prakash Agrawal, Dilip Sharma, Nikhil Sharma, Dinesh Kumar Sharma

Environmental Progress & Sustainable Energy📚 査読済 / ジャーナル2026-11-16#エネルギー転換対象セクター: transport
DOI: 10.1002/ep.70797
原典: https://doi.org/10.1002/ep.70797

🤖 gxceed AI 要約

日本語

エタノール–ガソリン混合燃料の課題(低発熱量・高い蒸発潜熱・低温始動性)に対処するため、AHP–TOPSISによる添加剤選定フレームワークを提案。RONと蒸気圧を重視し12種を評価、ジエチルエーテル(DEE)が最高評価となった。E20に5%添加した実験ではDEEがトルク・熱効率を向上させ低温始動時のHC・NOxを削減したが、全開時の排出は条件依存で、スクリーニング後の実証的検証が必要と結論づけた。

English

This study proposes an AHP–TOPSIS framework to screen and rank twelve fuel additives for ethanol–gasoline blends across thermophysical, combustion, and regulatory criteria. RON and vapor pressure received the highest weights, and diethyl ether (DEE) ranked top (closeness 0.904). Experimental testing at 5% in E20 showed DEE improved torque, power, and thermal efficiency and cut cold-start HC/NOx, though full-throttle emissions were parameter-dependent, so results serve as screening requiring blend-specific validation.

Unofficial AI-generated summary based on the public title and abstract. Not an official translation.

📝 gxceed 編集解説 — Why this matters

日本のGX文脈において

日本のGX文脈では、運輸部門の脱炭素化とバイオ燃料導入(次世代自動車・燃料政策)に関わる基礎的知見を提供する。ただしSSBJ・有報・投資家対応といった開示実務との直接的な接点は薄い。

In the global GX context

Adds to the global transport-decarbonization literature on biofuel blending and emissions compliance, relevant to renewable fuel standards and tailpipe regulation. It offers methodological value (MCDM screening) but limited direct linkage to TCFD/ISSB/CSRD disclosure frameworks.

👥 読者別の含意

🔬研究者:MCDM(AHP–TOPSIS)を燃料・材料選定に適用する際の重み付け・感度分析の実例として参考になる。

🏢実務担当者:バイオ燃料配合や添加剤選定の初期スクリーニング手法として、調達・R&D検討に応用可能。

🏛政策担当者:バイオ燃料規制や排出基準設計における添加剤評価の体系的枠組みとして示唆を与える。

📄 Abstract(原文)

Abstract Ethanol–gasoline blends are increasingly adopted to meet emission regulations and reduce dependence on fossil fuels; however, their application is constrained by low calorific value, high latent heat of vaporization, and poor cold‐start performance. This study presents an AHP–TOPSIS methodology for preliminary screening and ranking of fuel additives considering thermophysical, combustion, and regulatory criteria. Eight criteria were considered: Research Octane Number (RON), calorific value, oxygen content, latent heat of vaporization, density, vapor pressure, viscosity, and laminar flame speed. Twelve additives were evaluated using the proposed framework. AHP results indicate that RON (0.308) and vapor pressure (0.259) received the highest weights, highlighting their importance for knock resistance, combustion behavior, fuel vaporization, and cold‐start performance. TOPSIS identified diethyl ether (DEE) as the highest‐ranked candidate, with a closeness coefficient of 0.904, followed by acetone (0.537) and MTBE (0.516). Sensitivity analysis over the weight range of 0.20–0.80 revealed criterion‐dependent rank changes, with substantial sensitivity associated with calorific value, oxygen content, and vapor pressure. DEE, acetone, and MTBE were subsequently experimentally evaluated at 5% concentration in E20 under cold‐start and full‐throttle conditions. DEE demonstrated favorable performance characteristics, including higher torque, brake power, and brake thermal efficiency than E20, together with substantial reductions in cold‐start HC and NOx emissions. However, its full‐throttle emission response was parameter dependent. Therefore, the AHP–TOPSIS results represent a screening outcome requiring blend‐specific optimization and experimental validation. The framework provides a systematic basis for prioritizing candidate additives for further investigation and sustainable ethanol–gasoline fuel formulation.

🔗 Provenance — このレコードを発見したソース

🔔 こうした論文の新着を逃したくない方は キーワードアラート に登録(無料・3キーワードまで)。

gxceed は公開メタデータに基づく研究支援データセットです。要約・翻訳・解説は AI 支援で生成されています。 最終的な解釈・検証は利用者が原典資料に基づいて行うことを前提とします。