← 論文一覧に戻る

太陽光・圧電ハイブリッドエネルギー harvesting とIoTベース監視の統合:報告システムの比較分析と統一アーキテクチャ

Integrated Solar–Piezoelectric Hybrid Energy Harvesting with IoT-Based Monitoring: A Comparative Analysis of Reported Systems and a Unified Architecture (原題)

Y Santhosh Kumar Associate Professor, B Nagaveni, Ruksar Fatima, Sachik Standly, Rohit

Zenodo (CERN European Organization for Nuclear Research)📚 査読済 / ジャーナル2026-10-26#再生可能エネルギー
DOI: 10.5281/zenodo.23665142
原典: https://doi.org/10.5281/zenodo.23665142

🤖 gxceed AI 要約

日本語

太陽光発電と圧電フットステップ発電を組み合わせたハイブリッドエネルギー harvesting の3研究を比較し、電力密度・日次エネルギー・圧電寄与率の共通指標に正規化した。PV列と圧電タイルを12V DCバスに統合する統一アーキテクチャを提案し、IoTゲートウェイで監視する。30タイルで5.4Wカメラを約11時間駆動できるが、追尾型PVの日次エネルギーの3〜5%に留まると試算する。

English

This paper consolidates three hybrid solar–piezoelectric harvesting studies, normalizing reported figures to common metrics (power per area, daily energy, piezoelectric share). It proposes a unified architecture feeding a 12 V DC bus with IoT monitoring and fault flagging. Analytical scale-up shows a 30-tile array powers a 5.4 W camera for ~11 h but supplies only 3–5% of a tracked PV panel's daily energy, positioning piezoelectric tiles as supplementary sensing-grade sources.

Unofficial AI-generated summary based on the public title and abstract. Not an official translation.

📝 gxceed 編集解説 — Why this matters

日本のGX文脈において

公共空間の低電力供給やIoTセンシング電源としての応用可能性を示すが、日本のGX政策・開示制度との直接的な接続は弱い。実証実験の蓄積が今後の実装判断に必要。

In the global GX context

Relevant to distributed energy harvesting and IoT infrastructure, but offers limited direct linkage to TCFD/ISSB/CSRD disclosure frameworks. Its value lies in clarifying the supplementary role of piezoelectric harvesting relative to PV in urban energy systems.

👥 読者別の含意

🔬研究者:ハイブリッド harvesting 研究の指標正規化手法と統一アーキテクチャ設計の参考になる。

🏢実務担当者:公共空間のIoT電源設計において圧電タイルを補助電源と位置づける判断材料になる。

📄 Abstract(原文)

Hybrid energy harvesting that combines photovoltaic (PV) generation with piezoelectric footstep harvesting promises uninterrupted low-power supply in public spaces, but published prototypes use different tile designs, converters, monitoring schemes and reporting conventions, which makes them hard to compare. This paper critically consolidates three recent studies: an Arduino/ESP8266 solar–piezoelectric system with ThingSpeak monitoring, a footstep floor tile with a closed-loop buck converter, and a tracked-PV plus 48-sensor footstep system for DC loads. Their reported figures are normalised to common metrics (power per unit area, daily energy, and the piezoelectric share of total energy), and inconsistencies in the source data are identified. A unified architecture is then proposed in which a PV string and a piezoelectric tile array feed a common 12 V DC bus through independent converters, with a microcontroller and IoT gateway providing real-time monitoring and fault flagging. Using only values reported in the source studies, an analytical scale-up shows that a 30-tile array (60 Wh over 8 h) can supply a 5.4 W camera for about 11 h, but contributes only about 3–5% of the daily energy of a tracked PV panel of the class reported. The results indicate that piezoelectric tiles are best positioned as a supplementary and sensing-grade source, while PV remains the dominant energy contributor. Experimental validation of the proposed architecture is identified as future work.

🔗 Provenance — このレコードを発見したソース

🔔 こうした論文の新着を逃したくない方は キーワードアラート に登録(無料・3キーワードまで)。

gxceed は公開メタデータに基づく研究支援データセットです。要約・翻訳・解説は AI 支援で生成されています。 最終的な解釈・検証は利用者が原典資料に基づいて行うことを前提とします。