改質石炭ガス化スラグとフライアッシュを多孔質骨格としたAl-12Si複合相変化材料:蓄熱・サイクル性能
Modified Coal Gasification Slag and Fly Ash as a Porous Skeleton for Al-12Si Composite Phase Change Materials: Thermal Storage and Cycling Performance (原題)
Yingchao Wang, Jiading Jiang, Mingyue Wan, Ke Wu, 齐昌鑫, Yasuo Liu, 尹少武, Gang Wang
🤖 gxceed AI 要約
日本語
石炭ガス化スラグとフライアッシュをアルカリ改質して多孔質骨格とし、Al-12Si合金を安定化した複合相変化材料を冷間プレス・焼結で作製した。最適組成MCF-3は熱伝導率2.51 W/mK、圧縮強度56.17 MPa、潜熱103.68 J/gを示した。400〜800℃で100回の溶融・凝固サイクル後も潜熱保持率92.9%、漏出率0.65%と高い安定性を確認し、固形廃棄物由来の高温蓄熱材料としての実現可能性を示した。
English
Modified coal gasification slag and fly ash were used as a porous skeleton to stabilize Al-12Si alloy, forming composite phase change materials via cold pressing and sintering. The optimal composite achieved 2.51 W/mK thermal conductivity, 56.17 MPa compressive strength, and 103.68 J/g latent heat. After 100 melt-solidify cycles (400-800°C), latent heat retention was 92.9% with only 0.65% leakage, demonstrating a viable solid-waste-derived high-temperature thermal storage route.
Unofficial AI-generated summary based on the public title and abstract. Not an official translation.
📝 gxceed 編集解説 — Why this matters
日本のGX文脈において
鉄鋼・化学など高温プロセスを抱える日本企業にとって、廃熱回収と産業副産物の有効利用は脱炭素と資源循環の両立策となる。SSBJ開示やScope1削減の文脈で、廃熱蓄熱技術の選択肢として参考になる。
In the global GX context
Industrial waste-heat recovery and valorization of coal-derived solid wastes connect to Scope 1 abatement and circular-economy disclosure themes. The work offers a materials-level pathway relevant to hard-to-abate sectors under transition planning.
👥 読者別の含意
🔬研究者:固形廃棄物骨格を用いた高温相変化材料のサイクル安定性と界面設計の実証データとして参照できる。
🏢実務担当者:高温プロセスを持つ製造業が廃熱蓄熱・副産物活用の技術オプションを検討する際の材料特性の目安になる。
🏛政策担当者:産業廃棄物の資源化と廃熱利用を促す技術政策・循環経済施策の根拠として活用しうる。
📄 Abstract(原文)
The recovery of high-temperature industrial waste heat and the valorization of coal-derived solid wastes are important for sustainable thermal energy systems. In this study, modified coal gasification slag (MCGS) and fly ash (MFA) were used as a porous skeleton to stabilize Al-12Si alloy, and composite phase change materials were fabricated by cold pressing and sintering. The effects of skeleton composition and alkali modification on microstructure, thermal storage, mechanical properties, leakage resistance, and cycling stability were investigated. Alkali treatment roughened the particle surfaces and generated additional pores and capillary channels, enhancing alloy infiltration and interfacial mechanical interlocking. MCF-3, prepared at an initial MCGS: MFA: Al-12Si: binder mass ratio of 25:25:40:10, exhibited a thermal conductivity of 2.51 W m−1 K−1, a compressive strength of 56.17 MPa, and a latent heat of 103.68 J g−1. No detectable interfacial reaction products were observed, indicating good chemical compatibility. After 100 melting–solidification cycles between 400 and 800 °C, the latent heat remained 96.34 J g−1, corresponding to 92.9% retention, while the leakage rate was only 0.65%. These results demonstrate that the MCGS–MFA skeleton provides effective molten-alloy confinement and mechanical support, offering a viable route for developing solid-waste-derived high-temperature thermal storage materials.
🔗 Provenance — このレコードを発見したソース
- openalex https://doi.org/10.3390/ma19224833first seen 2026-11-18 07:06:47
🔔 こうした論文の新着を逃したくない方は キーワードアラート に登録(無料・3キーワードまで)。
gxceed は公開メタデータに基づく研究支援データセットです。要約・翻訳・解説は AI 支援で生成されています。 最終的な解釈・検証は利用者が原典資料に基づいて行うことを前提とします。