← 論文一覧に戻る

新規プロセス構成による炭素回収・貯留のエネルギー最小化

Energy minimization of carbon capture and storage by means of a novel process configuration (原題)

Muhammad, Hafiz Ali, Sultan, Haider, Lee, Beomjoon, Imran, Muhammad, Baek, Il Hyun, Baik, Young Jin, Nam, Sung Chan

ジャーナル2020-07-01#CCUS経営インパクト: コスト削減対象セクター: power
原典: https://publications.aston.ac.uk/id/eprint/41549/

🤖 gxceed AI 要約

日本語

本論文は、燃焼後CCSのエネルギー消費を抑える新規プロセス構成を提案する。リーンバポール圧縮、リッチ溶媒スプリット、再沸器凝縮水熱回収を単一フローシートに統合し、CO2圧縮には多段圧縮機・ヒートポンプ・超臨界CO2サイクルを組み合わせる。最適化の結果、再沸器熱量を3.36から2.65GJ/tCO2へ、圧縮電力を16,691kWから14,708kWへ低減し、等価仕事を15.8%削減できることを示した。

English

This paper proposes a novel post-combustion CCS configuration that minimizes energy penalties by integrating lean vapor compression, rich solvent split with vapor heat recovery, and reboiler condensate heat recovery in one flow-sheet. CO2 compression uses multi-stage compressors, a heat pump for liquefaction, and a supercritical CO2 power cycle for intercooling heat recovery. Optimization cuts reboiler duty from 3.36 to 2.65 GJ/tCO2, compression power from 16,691 to 14,708 kW, and equivalent work by 15.8%.

Unofficial AI-generated summary based on the public title and abstract. Not an official translation.

📝 gxceed 編集解説 — Why this matters

日本のGX文脈において

日本では火力発電の脱炭素化とCCS実装がGX政策の柱であり、分離回収のエネルギー効率改善は実装コスト・電力消費の低減に直結する。GX推進機構やJOGMECが進めるCCS事業の経済性評価に資する知見。

In the global GX context

Energy penalty is the central barrier to CCS deployment under net-zero pathways and transition finance. Efficiency gains of this magnitude directly improve the cost-competitiveness of CCS projects assessed under ISSB/TCFD transition plans and public decarbonization support schemes.

👥 読者別の含意

🔬研究者:プロセス統合と熱回収設計の最適化手法をCCS研究に応用する際の定量的ベンチマークとなる。

🏢実務担当者:CCS導入を検討する電力・熱供給事業者は、回収プロセスのエネルギー消費と運転コスト低減の設計選択肢として参照できる。

🏛政策担当者:CCS支援策や脱炭素技術ロードマップの費用対効果評価において、エネルギー効率改善余地を織り込む根拠となる。

📄 Abstract(原文)

Carbon capture and storage is considered a key technology for decarbonizing the heat and power industries and achieving net zero emission targets. However, the significant energy requirements of the process as currently utilized hinders its widespread implementation. This work presents a novel process configuration by which the energy expenditures of carbon capture and storage can be minimized. This configuration is intended to enhance heat integration during the capture process through an innovative combination of three stripper modifications, namely lean vapor compression, a rich solvent split with vapor heat recovery and reboiler condensate heat recovery using a stripper inter-heater in a single flow-sheet. For carbon dioxide compression, a novel pressurization strategy involving carbon dioxide multi-stage compressors, a heat pump system and a supercritical carbon dioxide power cycle was designed and evaluated. The heat pump was used for carbon dioxide liquefaction while the supercritical carbon dioxide power cycle was employed to recover the intercooling heat. Through a comprehensive parametric investigation of the proposed configuration, the optimum value of the key operating parameters i.e., the split fraction, flash pressure, stripper inter-heater location, stripper inter-heater solvent flowrate, carbon dioxide liquefaction pressure and supercritical carbon dioxide cycle turbine pressure ratio were estimated. The performance of the proposed design at the optimized condition was quantified in terms of the reboiler heat duty, the carbon dioxide pressurization power and the equivalent work and compared to a baseline case post-combustion carbon capture and storage process. The proposed case reduced the reboiler heat duty from 3.36 GJ/TonneCO2 to 2.65 GJ/TonneCO2 and the electric power required for carbon dioxide compression from 16,691 kW to 14,708 kW. The results demonstrate that the new design can significantly reduce the reboiler duty, compression power and equivalent work by 21.1%, 11.88%, and 15.8%, ...

🔗 Provenance — このレコードを発見したソース

🔔 こうした論文の新着を逃したくない方は キーワードアラート に登録(無料・3キーワードまで)。

gxceed は公開メタデータに基づく研究支援データセットです。要約・翻訳・解説は AI 支援で生成されています。 最終的な解釈・検証は利用者が原典資料に基づいて行うことを前提とします。