← 論文一覧に戻る

セメント、石灰、固形廃棄物系固化材およびMICPによるTSC複合土の安定化比較:力学性能、微細構造、炭素排出

Comparative Stabilization of TSC Composite Soil Using Cement, Lime, Solid-Waste-Based Binders, and MICP: Mechanical Performance, Microstructure, and Carbon Emissions (原題)

Haowei Ding, Qiwei Zhan, Changhao Fu, Wenqian Gan

Materials📚 査読済 / ジャーナル2026-10-31#CCUSOrigin: CN経営インパクト: コスト削減対象セクター: construction
DOI: 10.3390/ma19214636
原典: https://doi.org/10.3390/ma19214636

🤖 gxceed AI 要約

日本語

チタン石膏と粘土を60:40で混合したTSC複合土に対し、セメント・固形廃棄物系固化材・石灰・MICPの4手法を比較した研究。28日強度はセメントが最大(約2.6MPa)だが、MICPは炭素排出が4.3kg CO2/tとセメント比で約86%削減される。力学性能と環境影響のトレードオフを明示し、MICPの低炭素代替材としての可能性を示す。

English

This study compares cement, a solid-waste-based binder, lime, and MICP for stabilizing a titanium-gypsum/clay composite soil, integrating strength, durability, microstructure, and life-cycle carbon emissions. Cement gave the highest 28-day strength (~2.6 MPa), while MICP emitted only 4.3 kg CO2/t—about 86% less than cement. The work highlights a clear mechanical-versus-carbon trade-off and positions MICP as a promising low-carbon option pending field validation.

Unofficial AI-generated summary based on the public title and abstract. Not an official translation.

📝 gxceed 編集解説 — Why this matters

日本のGX文脈において

建設資材の脱炭素はScope 3排出とグリーン調達の観点で日本企業にも関係するが、本論文は材料実験が中心でSSBJ・有報開示への直接的示唆は乏しい。副産物活用と低炭素固化材の評価枠組みとして参考になる。

In the global GX context

Construction materials decarbonization feeds into Scope 3 accounting and green procurement under CSRD/ISSB, and the paper's combined engineering-plus-carbon-emissions framework offers a template for comparing low-carbon stabilization alternatives. Its relevance to disclosure regimes is indirect, however, as it is primarily a materials-science study.

👥 読者別の含意

🔬研究者:建設材料の力学性能とライフサイクル炭素排出を統合評価する比較枠組みの一事例として参考になる。

🏢実務担当者:建設・土木の調達担当は、低炭素固化材の選定時に強度と炭素のトレードオフを定量比較する際の参考にできる。

📄 Abstract(原文)

To promote the resource utilization of industrial by-product titanium gypsum while improving its engineering performance, a TSC composite soil containing titanium gypsum and clay at a mass ratio of 60:40 was investigated. Four stabilization methods, namely cement, solid-waste-based cementitious binder, lime, and microbially induced calcium carbonate precipitation (MICP), were systematically compared. Mechanical and durability performance was evaluated through unconfined compressive strength, water-stability, and freeze–thaw tests at different curing ages, while the stabilization mechanisms were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM-EDS), and nitrogen adsorption–desorption analysis (BET). Carbon emissions were further evaluated using a life-cycle-based emission-factor approach. The comparative framework integrating engineering performance, microstructural mechanisms, and environmental impacts constitutes the main contribution of this study. At 28 days, cement-stabilized soil exhibited the highest UCS of approximately 2.6 MPa, followed by the solid-waste-based binder, lime, and MICP systems. MICP produced CaCO3 precipitates that filled pores and formed interparticle bridging structures, thereby improving water stability and structural integrity despite its relatively lower short-term strength. The estimated net carbon emission of the MICP system was 4.3 kg CO2/t of stabilized soil, approximately 86% lower than that of cement stabilization. These results demonstrate a clear trade-off between mechanical performance and environmental impact among the four stabilization approaches and indicate that MICP is a promising low-carbon option for titanium-gypsum-based composite soils, although further field-scale and long-term validation is required.

🔗 Provenance — このレコードを発見したソース

🔔 こうした論文の新着を逃したくない方は キーワードアラート に登録(無料・3キーワードまで)。

gxceed は公開メタデータに基づく研究支援データセットです。要約・翻訳・解説は AI 支援で生成されています。 最終的な解釈・検証は利用者が原典資料に基づいて行うことを前提とします。