← 論文一覧に戻る

セメント–銅尾鉱複合材における力学性能、重金属溶出、CO2排出削減

Mechanical Performance, Heavy-Metal Leaching, and CO2 Emission Reduction in Cement–Copper Tailings Composites (原題)

Chao Liu, Yutong Xiao, Zhu Luo, Dong Fang, Li Wan, Zhigang Zhu, Fang Xu

Coatings📚 査読済 / ジャーナル2026-11-03#CCUSOrigin: CN経営インパクト: コスト削減対象セクター: construction
DOI: 10.3390/coatings16111308
原典: https://doi.org/10.3390/coatings16111308

🤖 gxceed AI 要約

日本語

銅尾鉱をセメントの一部代替材として用い、粒子充填とアルカリ溶解の複合効果を検討した研究。10%置換で28日圧縮強度46.5MPa・曲げ4.83MPaと最大となり、過剰置換はセメント量減少で強度が低下した。Cu・Zn溶出は低く抑えられ、簡易な内包炭素比較から炭素削減ポテンシャルも示された。ただし単一鉱源・短期評価に限定される。

English

This study tests copper tailings as a partial cement replacement, integrating mechanical performance, alkaline dissolution, microstructure, Cu/Zn leaching, and a simplified embodied-carbon comparison. A 10% replacement gave the highest 28-day compressive (46.5 MPa) and flexural (4.83 MPa) strengths via particle packing effects, while excessive replacement weakened performance. Leaching of Cu and Zn remained low, indicating potential for low-carbon composites, though results are limited to one tailings source and short-term testing.

Unofficial AI-generated summary based on the public title and abstract. Not an official translation.

📝 gxceed 編集解説 — Why this matters

日本のGX文脈において

建設資材の低炭素化はScope 3排出削減やグリーン調達の観点で日本企業にも関連するが、本論文は中国の一事例であり日本の制度・政策との直接連関は薄い。

In the global GX context

Adds to the global literature on supplementary cementitious materials and embodied-carbon reduction in construction, relevant to Scope 3 upstream emissions and green procurement, though evidence is from a single Chinese tailings source.

👥 読者別の含意

🔬研究者:廃棄物由来セメント代替材の力学・溶出・炭素評価を統合した実証データとして参考になる。

🏢実務担当者:建設資材のScope 3削減や低炭素コンクリート調達の選択肢検討に示唆を与える。

🏛政策担当者:産業副産物の資源循環と建設脱炭素政策の設計に資する基礎的知見を提供する。

📄 Abstract(原文)

Copper tailings are generated in large quantities, and their efficient utilization remains challenging because of their complex mineralogical composition and relatively low reactivity. This study investigated the feasibility of partially replacing cement with copper tailings, with particular emphasis on the combined effects of particle packing and potential alkaline dissolution. Unlike previous studies mainly focusing on the use of copper tailings as aggregates or cement raw materials, this work integrates mechanical performance, alkaline dissolution behavior, microstructural characteristics, Cu/Zn leaching behavior, and simplified embodied-carbon comparison. The results showed that a 10% copper tailings replacement yielded the highest 28 d compressive and flexural strengths of 46.5 MPa and 4.83 MPa, respectively. The improvement was mainly associated with particle filling and packing effects, while alkaline dissolution tests indicated that limited Si and Al species could be released from the tailings under alkaline conditions and potentially contribute to hydration. Excessive replacement reduced the cement content and weakened the mechanical performance. The prepared composites also exhibited low Cu and Zn leaching concentrations. Overall, the study demonstrates the potential of copper tailings for partial cement replacement while considering mechanical performance, environmental safety, and carbon-reduction potential. However, the conclusions are limited to one tailings source, 28 d mechanical properties, short-term leaching behavior, and a simplified embodied-carbon comparison.

🔗 Provenance — このレコードを発見したソース

🔔 こうした論文の新着を逃したくない方は キーワードアラート に登録(無料・3キーワードまで)。

gxceed は公開メタデータに基づく研究支援データセットです。要約・翻訳・解説は AI 支援で生成されています。 最終的な解釈・検証は利用者が原典資料に基づいて行うことを前提とします。